So i replaced the rear axle assembly on a 2000 bravada with a rear end from a 1999 blazer with the same gear ratio’s and same everything. i ran vin numbers on both vehicles. and they both have the same exact rear end. it drives fine forward and reverse.
Automobile how do i pull drive axle frm axle shaft not hub 96 plymouth neon?
If you put an automatic transmission in neutral and raise the rear wheels, will the driveshaft spin?
I used the GDT5 tool from Try-In Tools to remove the hub. It took a while to reinstall it because the spindle on the hub barely fits into the knuckle. Anyway, I was able to get it put in using the axle nut to help guide it in. I
I have slightly over sized tires on my 86′ Ford F-150….and i was told to adjust my LOCKING NUTS on my front axle…where are these nuts…and how do i adjust them to keep me from over steering, and causing my tires to rub???
Its a squeal that sounds like the brakes. I only get it when I turn the wheel just past left of center and when braking. If I turn left or brake the squeal comes on and stays for about ten seconds once I straighten out the wheel. When I