Question About Will A Bad O2 Sensor Cause An Engine To Not Idle

Sponsored Links

  • Advertisement

1988 Ford Ranger 2.9 Hesitation

Asked on May 12, 2010 Only when motor is at running temperature, there is severe hesitation and poor idle. motor wants to die, poor idle unless its not under any load. It has great vacuum pressure, fuel pressure, replaced fuel filter, map sensor engine coolant temperature sensor, cap and rotor, along ... Read more

What Would Cause An Engine To Quit When The Manifold Absolute Pressure M.A.P. Sensor Is Plugged In, . . .

Asked on Aug 12, 2010 But run fine with it unplugged from the wiring harness? There are no vacuum leaks (the engine is generating 18 in. Hg vacuum at ~1,100 rpm idle, the same vacuum generated by the same engine in another similar vehicle whose M.A.P. sensor is working). The automatic ... Read more

Why Does My Car Idle High

Asked on Aug 20, 2010 I have a 2000 Pontiac Grand Am 2.4L. I have replaced the TPS (Throttle Position Sensor, IAC (Idle Air Control), Spark plugs, boots and distributor cap. I have also replaced 1 vacuum hose that had a leak. What else could cause a high idle?? I have 138,000 ... Read more

My Car Has A P0505 Code In My Honda Civic 1997 Ex Any Help Is Appreciated

Asked on Jun 21, 2010 The owner said it need a tune up but it needed more than just that. The car first had misfire detected all through the cylinders 1-4 the a map sensor and a tps sensor problem i can't remember the codes for that but after i found ... Read more

If A Throttle Position Sensor Tps Is Bad But Engine Idles, Could It Knock Once Fixed

Asked on Aug 22, 2010 My car would idle ok but once you press the gas it would die. After having it diagnosed i was told the throttle position sensor was bad, but the mechanic was able to adjust it long enough for it to work but said the engine was ... Read more

Where Is The Crankshaft Position Sensor On A 1998 Jeep Grand Cherokee With 2WD And A 4.0 Liter Engine

Asked on May 18, 2010 I need to replace it due to my engine stalling issue, and would like to do it myself. Please let me know where it is located and if there are other parts involved in the change out? Thanks!! I've had the MAP sensor replaced, as ... Read more

Parts Cost Vs Labor Does This Sound Weird

Asked on May 13, 2010 This is an estimate for a 2001 nissan maxima I always thought labor was more than parts. Common problems on this vehicle are failures of the Ignition Coils and Mass Air Flow (MAF) Sensor. Failure of the Ignition Coils and MAF Sensor can cause the engine to run ... Read more