Question: What Does It Mean When You Have Oil In One Of Your Car Cylinders

Audi A4 2.8 Quatro How Can You Check If Ignition Coil Is Bad…

Or does not get a spark? what are the symptoms? the car is starting fine but it drives on 100% or on 30%. Like it is driving on all cylinders and than on just 2 or 3 cylinders... UThockey>why do you think it is a air flow problem? thank you ...

7.3 IDI Rebuild Procedure

I'm buying a 93 non-turbo 7.3 IDI diesel and want to do a full rebuild before it goes in my truck. My question is; is it better to sleeve the cylinders or bore it out? And where can I get sleeves for the cylinders? Thanks ...

Could Bad Spark Plugs Cause A Car To Run On 3 Cylinders Instead Of 4

I was told my car was only running on 3 cylinders and possibly could be fixed by replacing the spark plugs. Does this sound right? Please help. I am not car smart. Thanks! ...

Gt200 Not Firing On Two Cylinders, Compression Good, No Spark

Might be a little help here. I think I narrowed it to the timer-based sensor coil assembly. ohm not correct. this leads to no spark on two cylinders. the other four have good spark. no idea how much the part will cost? dre is a market for used engines? This is a rebuilt power head. ...

Please Help With Cylinder Heads On A 1970 Type I Volkswagen Beetle Engine

I have recently rebuilt a 1970 Type I Volkswagen Beetle engine. There are no head gaskets on these engines; a recess in the head slips over a protruding sleeve on the top of the cylinder. When I was finished torquing the heads down I looked to see if the head was butted up against the cylinders, and I noticed that there was about a 3/16" gap between the head and cylinders. Should this gap be there (it is uniform and on both ...

Water In Only Half The Cylinders

Ok weird question but i dont really know how to ask it. we have a 97 dodge intrepid and recently i asked about the muffler shortly after that we had water in our intake manifold but its only in 3 of the 6 cylinders 1, 3 and 5 and now me and my bf are scratching our heads and wondering now what? anyone can suggest anything, at this point i am seriously thinking about junking it and trying to find a ...

Help Im Looking For A 10001200hp Set Of 350 Connecting Rods

Im looking for a set of connecting rods (or singles if possible) that i can purchase & will handle 1000-1200hp, dont worry about the rest of the mods-my question is can anyone help me & how much/can you post a link? 1st answer fail... i -am- building the motor. twin turbo 3.5 v6 that breathes nicely with a cryo-treated & forged crank, custom forged pistons, highly tuned with each bank of cylinders having its own ecu, intake, & & exhaust, not intersecting with the ...

I Can Not Start My 1989 750il Bmw After It Has Been Stored. What Do I Do

There is no spark nor fuel on the right bank cylinders. I tested the pulse sender, coil, distributor cap and rotor, fuel pump and its control relay; they all seem to be okay. The left bank works fine, but the EML indicator comes on sometimes. I already tried to swap the hoses, but it did not work neither. Instead, if I hook up the hose with fuel pressure to the left bank of cylinders, the car will start but the idel is ...

Is It Possible To Install A Front Oxygen Sensor On A 96 Ford Taurus By Yourself Or Do You Need A Mechanic

Do you need to put the car on a lift or are the front oxygen sensors located under the hood near the engine? I read that even the front O2 sensors are under the car so i decided to go to a mechanic (especially since the car was smoking today). He said 2 cylinders out of 6 dont have enough compression and i need a new engine. Is it true theres no other way to repair the cylinders except by replacing the ...

1989 4.0 Jeep Cherokee Fuel Injector Help

I recently did a head gasket on an 89 jeep Cherokee for my friend. I got to the last part of reassembly which would be the fuel rail and realized the only damn thing I didn't label was the connectors. The jeep wasn't starting and as I fiddled with the connectors it would run on a few cylinders but I couldn't manage to get the right combination. I know that the harness is only able to have the connectors mixed up ...