Question: Sbcheverlotquestions

Are The Plugs On The Stereo Side Of Sony Xplod Car Stereos The Same From One To Another

I have 2 sony Xplod car stereos and I was wondering if the plug going into the back of the stereos are the same. It would make things alot easier if they were. ...

What Carburetors Do You Think

I need to ask you car guys which carburetors sould i put on .I got a Road Demon JR 725 ,a Edelbrock perfomer 750,or a Holley classic series 650 double pumper.... I have a 1964 chevy impala with a 350ci 4 bolt main nothing special done to motor its got a edelbrock intake performer rpm,a msd ignition (6AL) with distributor and wires...and all the chome you can think of .. ...

More Questions Concerning My Firebird Swap

I recently bought a 1996 trans am v8 5.7, and a 1996 firebird v6 3.8,for parts, can i swap over the a/c and its components and also the power steering. its all complete in the v6 but i need it in my trans am. power steering looks like i might be able to hook up, might have to put the brackets elsewhere, but the a/c im not really too sure will hook up, any help answering these questions woild be greatly ...

What Does It Mean When A Piston Is Forged

What does it mean when a piston is forged? ...

Where Can I Find Parts For A 1989 Honda CBR600F1 Hurricane Besides EBay

I've looked on eBay and all they have is clutch levers, brake pads, etc. I'm looking for an inexpensive slip-on exhaust and body parts. ...

Brakes On A 1997 Nissan Altmia

I changed the brakes on my car 97 nissan altima i changed the front disk and it worked great then i changed the back disk pads and i had to unscrew the calipater then screw it back in now the brakes dont work very good now do i need to blead them? ...

Fair Estimate Based On The Work Needed On My 2002 Volvo S80

I have a 2002 Volvo S80, which my parents found out that I just need a little work. I have put into it money, but I do not want to put in when the car is worth. The problems are: - Timing belt needs changing. (Yes I know this is extremely important on a Volvo, I would so ASAP) Upper engine mount would do is loose, so I'd have to probably replace the lower mount with him not sicher.-The exhaust pipe ...

How Much Horsepower And Torque Will I Gain From Putting The SCT Performance Chip On My 1994 Mustang GT

The bolt ons i have are: BBK cold air intake, Trickflow underdrive pulleys, Pypes off-road x-pipe, Flowmaster exhaust system, and i am getting a BBK 70 mm throttle body. Its gonna be a while before i can get a supercharger, but i can always take the chip and re-tune it when i do ...

Is This A Fair Price For This Car

I am selling a 2005 Jeep Grand Cherokee Laredo 4.7L V8, Grey exterior paint with grey interior. It has the following aftermarket parks: -Kenwood stereo -K&N Intake -Black Grille -Black rims (chrome accent), with A/T Tires (Big O bigfoot tires) -Flowmaster exhaust -HD fog lights, HD normal lights, regular high beams Overall in mint condition with the exception of a few very, very small nicks in the front bumper from rocks hitting it. No dents, no major blemishes, no scratches. My asking price is ...

Removing Cclip On Passenger Side Rear Axle Shaft For 94 Ford E150

Someone already answer portion of my questions at this link: http://au.answers.yahoo.com/answers2/frontend.php/question?qid=20080108134456AA1aQX4 I have been trying to remove the C-clip that is around the end of the axle shaft with two screw drivers. It kept sliding around the ring. This C-clip do not have any holes for me to use any kind of "ring" removing tool like those you use to remove or insert piston ring and so on. Someone told me to use a slide hammer and put it at the "wheel ...