Question: Pull Force Of Hard Drive Magnet

1999 Honda Passport Fog Light Bulb Replacement

Hi, I've never seen anything like this...it seems like the bulb for the fog light is hard-wired directly into the electrical system. You can't just pull the bulb itself out ( I didn't want to force it out, at least) because it appears that you have to replace the bulb and wire leading from the bulb, like you'd have to cut the wire and replace it with a new bulb/lead wire. It looks like you should be able to pull the ...

What Does Force Inductuion Do

I was told that force induction gives you better performance .. how does it work and how hard is it to install ?? ...

Will A Rare Earth Magnet With A Pull Force Of 124.50 Lbs Be Strong Enough To Trip An Induction Loop

I recently moved to the city and have to use a parking garage. My vehicle will not trigger the induction loops necessary to activate the card reader which then raises the gate. I've eliminated the possibility that it is my card since it works every other swipe at the garage except the entrance. I've also eliminated the possibility that the sensor is faulty because I watched as cars passed through it. I think my vehicle is not ...

Can You Hook Up A Hard Drive To An Alpine Car DVD/CD Stereo

I am looking at some alpine car in-dash dvd/cd stereos and I am wondering if you could hook up a car-based hard drive to one of these so you can access the music on your hard drive using the touch screen interface ...

Does Placing A Magnet On Your Oil Filter, Help In Ridding Metal Filings From Traveling Through The Engine

It makes sense to me that it would be a magnet on the oil filter, trap some of the small metal shavings from circulating in the engine. What's wrong with my theory? ...

I Am Having Trouble Getting The Bearing Assembly Off Of The Axle On My Fl350

I did one of the rear axles fine. I just hit the end of the rear axle with moderate force a few times and it came right out the other end of the bearing assembly. But I can't do it with the other axle. I have applied so much force but it's not coming out. I don't want to keep hitting it because I'm starting to damage the end of the axle a little. Do I have to ...

Car Not Going Into Or Coming Out Of First Gear

I have a saturn with a manual transmission. for awhile now i've had trouble getting it into first gear. the gear shift itself just doesn't want to move into first. it doesn't matter if i'm slowing down and going from second to first or if i'm going from reverse to first. i can always get it into first, but i just have to push the gear shift really hard. sometimes i'll try moving it back into ...

Splitting The Braking Force Between Two Tyres…

Let us consider a bike with a brake system so that pressing a single pedal, both the front and rear brakes activated. . . What form of hydraulic circuit can be used to bridge the gap between the braking force front and rear brakes. . . . ...

What Kind Of Turbocharger Should I Go For My 95 Gsr

I've been contemplating on either going all motor or force induction. i guess i chose the force induction just because of the efficiency and the numbers. which turbocharger should i get? i hear greddy makes a street legal one, and i want one thats street legal. any more information feel free to ask about the car. thanks a lot guys I wanna get 300whp around there and still be able to be a daily driver. if thats possible that is ...

How to Make a Homemade Cold Air Intake

I'm wanting to upgrade my cold air intake for my 2002 PT Cruiser, but have a hard time wanting to drop $200 - $300 on what seems so simple. I like the Airaid setup, and thought maybe to just pull out anything restrictive in the stock intake system and drop in a K&N filter. But I think flow might be better with more direct piping. Any suggestions for materials, etc? I want to make sure the air is cold, and don't ...