Question: P0325 Nissan Altima Knock Sensor Replacement

1997 Nissan Maxima Knock Sensor

My parents have a 1997 Nissan Maxima GLE and they need to replace their Knock Sensor because they're getting the error code "P0325: Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)". I believe that I have found a good DIY for this at http://www.motorvate.ca/mvp.php/507 but I need to make sure that this is the correct part that is malfunctioning. My reason for concern is that on this website: http://replacement.autopartswarehouse.com/parts/autopartswarehouse/wizard.jsp?year=1997&make=NI&model=MAX-GLE-001&category=All&part=Knock%20Sensor&dp=true there are two different knock sensors ...

Cost For Catalytic Converter And Knock Sensor

Whats the rough average price and hours to replace a catalytic converter on a 2001 Nissan Altima and a Knock Sensor. My car's SES light came on and I pulled the codes: P0420 and P0325. I am doing a worse case scenario price, especially for the cat if in fact thats the problem. The vehicle has 107k miles on it. That will void the warranty wont it? ...

1995 Nissan Altima Knock Sensor AND Rear Ox Sensor Heat Trouble Codes

My mother-in-law has a 1995 Nissan Altima, four cyl. Check Engine Light codes are 34 and 77 (34 = knock sensor circuit / 77 = rear oxygen sensor heating circuit). I have the manual Childris but I can not find these items in the book. I can locate the knock sensor on the 240SX engine (engine wrong), but not on the Altima. I think that one problem could cause the knock sensor is another problem to show how to start the ...

How To Fix Knock Sensor Code For 1998 Nissan Maxima

I have a 98 nissan maxima, it failed the ispection because of these codes p0325 Knock sensor p0135 o2s htr circuit bak1 sensor 1 p0141 o2sensor b1 s2 htr malf p0155 o2 sensor b2 s1 htr ckt malf p0443 EAVP ctrl purge control valve malf i need to get it inspected ,can any one help meout ...

Emmission Test Failed Knock Sensor 1 Circuit Bank 1/single Sensor, Code P0325 How Much This Cost To Repair

2000 Nissan Quest GXEIch also have O2 sensor failure. Could knock sensor failure due to O2 sensor failure? Thanks ...

Nissan Altima Sensor Problem

I got codes of P0100 and P0325 on my scanner, which came back as mass airflow and knock sensor problem, before replacing them myself, i was wondering which is more important to change first, i have yet to try to clean the mass airflow sensor but if cleaning it does not make a difference, which sensor before the other will make a bigger difference in stopping the hesitation? ...

PO325 Code I Replaced My Knock Sensor 3 Times

1997 Nissan Altima GXE, CEL is not on but I had it scanned after rough idling and cutting off on me and thats what came up. I replace first with a used one and then tried two new ones..still the same code and running bad! 1997 Nissan Altima GXE, CEL is not on but I had it scanned after rough idling and cutting off on me and thats what came up. I replace first with a used one and then tried two ...

1997 Nissan Altima GXE Needs A New Knock Sensor. What Happens If I Don’t Replace It

The service engine light came on. The mechanic said it needed a new knock sensor. He also said both oxygen sensors needed replacement and I did that hoping it would solve the problem. The check engine light is back on. It doesn't seem worth it to spend $500 fixing the knock sensor. It still runs well. What will happen if I don't replace this part? Can it damage another part or lead to a more expensive repair? Is it dangerous? (i.e. ...

Does Changing The Knock Sensor Help The Car Pass The Emission Test

I have a 1996 Nissan Maxima and my test results indicated i have an error code: P0325- Knock Sensor 1 Circuit Malfunction. Do I need to change the sensor in order to pass the test? Any help would be greatly appreciated. Thanks ...

Check Enging Light P0325 Knock Sensor Bank 1 Or Sensor Closed Loop Bank 1 P0135 O2 Sensor

2000 nissan quest ...