Question: O2 Sensor Bank 1 Sensor 2 Location On A Nissan Maxima 1998

How To Replace A Knock Sensor And Oxygen Sensor On A Nissan Maxima 1998

I got the check engine light on my nissan maxima se and reading the code at autozone indicates that the knock sensor and oxygen sensor are faulty and, probably, need to be replaced. Is this an expensive repair at the Nissan shop? Where can I find information about how to get to these sensors -- where it is located in the car and so on -- so that I can do it myself or get a mechanic friend to help ...

How To Fix Knock Sensor Code For 1998 Nissan Maxima

I have a 98 nissan maxima, it failed the ispection because of these codes p0325 Knock sensor p0135 o2s htr circuit bak1 sensor 1 p0141 o2sensor b1 s2 htr malf p0155 o2 sensor b2 s1 htr ckt malf p0443 EAVP ctrl purge control valve malf i need to get it inspected ,can any one help meout ...

2001 Toyota Camry Oxygen Sensor Bank 1 Sensor 2 Location

I need to replace my oxygen sensor in bank 1 sensor 2, but I have no idea where it is. I bought an oxygen sensor that is like the one for bank 1 sensor 1, will it work for sensor 2? ...

98 Nissan Maxima Knock Sensor

Can someone with minimal Mechanic knowledge change out a knock sensor? and if so Where is the Knock sensor located? Its a 1998 Nissan Maxima SE V6 3.0. ...

Where Is The Oxygen Sensor Bank #1, Sensor #1 Located At On A 2004 Hyundai Tiburon GT V6

Asked something similar a few minutes ago, but I wanted to refine it. I need to have the O2 sensor at bank #1, sensor #1 replaced (the mechanic referred to this as "bank #1, side #1", but I think he meant sensor #1). I just need to know which one it is so I can buy the correct part. What is the location (side of car and before/after catalyst)? Thanks in advance for the info! Thanks for the ...

O2 Sensor & Knock SensorVent Valve Issues For A 1998 Nissan Maxima

I HAVE A 98 MAXIMA AND THE SERVICE ENGINE LIGHT CAME ON. I WENT TO MY MECHANIC AND HE CAME UP WITH MY KNOCK SENSOR AND VENT VALVE AS NEEDING TO BE REPLACED. I WANTED A SECOND OPINION FOR MY OWN SAKE. TOOK IT TO A NISSAN DEALERSHIP AND THEY SAID THAT I DON'T NEED A KNOCK SENSOR. BECAUSE THE O2 SENSOR GOES BAD OR VENT VALVE, THAT SETS OFF THE CODE FOR THE KNOCK SENSOR. ...

1997 Nissan Maxima Knock Sensor

My parents have a 1997 Nissan Maxima GLE and they need to replace their Knock Sensor because they're getting the error code "P0325: Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)". I believe that I have found a good DIY for this at http://www.motorvate.ca/mvp.php/507 but I need to make sure that this is the correct part that is malfunctioning. My reason for concern is that on this website: http://replacement.autopartswarehouse.com/parts/autopartswarehouse/wizard.jsp?year=1997&make=NI&model=MAX-GLE-001&category=All&part=Knock%20Sensor&dp=true there are two different knock sensors ...

Check Enging Light P0325 Knock Sensor Bank 1 Or Sensor Closed Loop Bank 1 P0135 O2 Sensor

2000 nissan quest ...

Location Of Camshaft Position Sensor On A 1997 Mercury Villager

I hooked up an OBD II and it gave me the code P0340 Camshaft Position Sensor A-Bank 1 Circuit Malfunction. What does that mean and can it stop the spark from reaching the coil? I also need the location for this particular sensor? HELP!!! THANKS!!! ...

Where Is The Knock Sensor Locted At On A 96 Nissan Maxima

I have a 1996 nissan maxima i need to change the knock sensor i need to find out where its located i really need to fix this car i drive a long way to and from work its costing so much in gas i loose half of my fuel with this prob ...