Question: Is Squeaker Positioned On Top Or Bottom On Auto Brake Pads

Help 1992 Cadillac Sedan Deville My Nephew Just Replaced The Front Brake Pads And Rotors. He Put The Pads On

Upside down.(sensor is on top instead of bottom) my brother says this is ok. I'm concerned. I have alot of play in the brake peddle also. Any opoions??Any suggestions? ...

Where To Change Brake Pads/rotors For My 2007 Honda Civic

My brakes are getting worn out. I think I need to change the Brake pads. The mileage is 38000 (I have already changed the rotors and pads at 15000). So my question is Do I do it at Honda Service or Meineke or Advance Auto Parts. Can someone please suggest the best place for Brake services and also their experiences. Btw I'm at Columbia, MD Also please recommend any other good brake specialists ...

My Nissan Maxima Rear Brake Pads Do Not Fit Inside The Caliper

So I had to replace my rear brakes. I started with the brakes on the rear driver side and had no problem with them. Once I turned/pushed the piston back into place, the caliper fit around the pads no problem. However, on the passenger side rear brakes, I got the piston in all the way, but when I place the brake pads in their respective locations the pin holes on the caliper body do not seem to ...

How Much Should I Pay For Replacing My Front Brake Rotors And Brake Pads

My brakes are going went to pep boys they said my brake pads are gone and i need to replace the pads and the rotor at the bare minimum but they said i should think about changing my front left caliper to and replace the brake pads for the back to with also the rear brake drums too how much should it cost to get it all done and what should i pay for just getting my front brake rotors ...

Brake Pads Problem. Please Help

Hello! I heard weird noise coming from the right rear everytime I hit the brake. I went to an auto repair shop to check out the problem. He told me that I'm using aftermarket brake pads. He wanted me to change the rear pads to original Nissan one for 120 dollars. He said that may solve the weird noise problem. So is 120 dollars for the rear Nissan pads reasonable? Any comments are welcome. Thank you. ...

I Have Brake Pads Problem. Please Help. =

Hello! I heard weird noise coming from the right rear everytime I hit the brake. I went to an auto repair shop to check out the problem. He told me that I'm using aftermarket brake pads. He wanted me to change the rear pads to original Nissan one for 120 dollars. He said that may solve the weird noise problem. So is 120 dollars for the rear Nissan pads reasonable? Any comments are welcome. Thank you. ...

I Heard Weird Noise When I Brake. Please Help

Hello! I just changed new aftermarket brake pads on my 1997 Maxima. Then I heard weird noies from right rear everytime I hit brake. I went to an auto shop to check out the problem. The guy told me to change back to new original Nissan pads for 120 dollars. He said that may solve the problem. But not guarantee. So should I go for it? Any comments are welcome. Thank you. ...

How Much Do Front Brake Pads & Rotors Cost On A 2000 Toyota Camry LE.

Hello, Yesterday my car started grinding when I was braking... I knew my pads were low and I drove on it for about a day. The grinding got worse as I knew there was no pad left and it was now metal on metal. I took my car into Speedy Auto and got it checked out. They showed me bare brake pads and grooves in my rotors from the grinding. They said the rotors had hot spots on ...

Chaning Brake Rotors Without Changing Pads

I changed the front brake pads of my mazda 95 protege without changing brake rotors or resurface last month and got 1000 miles on it. Now I need to change the front rotors because of its crack. Can I change rotors only or Is it imperative that I always need to change rotors and pads together? One more question, when I step on brake pedal, it doesn't stop right away. to fix this problem, what do I have to do? Do ...

How Do You Recondition General Aviation Ac Brake Pads

Do you just disassemble the brake shoes and scuff up the pads to remove the glazing? My brake pads are farely new and the pad thickness is good. Do you need to clean the pad faces with anything in particular prior to reassembly? How do you like to wear in the pads after reconditioning? Mine are Cleveland brakes on my Steen Skybolt. I've already drained and replaced the hydraulic fluid correctly. Master cylinders are fine too. My brake system is sound ...