Question About How To Replace A Front Drive Shaft Boot On A 99 Jeep Grand Cherokee


What is the latest model Jeep Cherokee that has interchangeable front drive shafts with a 1994 Cherokee

Asked on Mar 27, 2010 I need a front drive shaft for my 1994 Jeep Cherokee...and I cant find any parts stores that have one so I'm having to go to junkyards now. Problem is that the last drive shaft I had ended up causing me $1400 damage on my car ... Read more

On A 1993 Jeep Grand Cherokee Larado, Can The First Drive Shaft On The First Axle Be Turned At All

Asked on Aug 18, 2010 On mine it will turn a noticible bit. Its having some kind of problem down there and i heard it could be the universal joints. Does that shaft usually have play or is it usually non moveable. And should i check it if the vehicle is ... Read more

96 Jeep Grand Cherokee Front Side Marker Bulb Replacement

Asked on Aug 30, 2010 I have a 96 Jeep Grand Cherokee Limited, I need to replace the FRONT SIDE MARKER BULBS. how do I get to them? it seems like I have to take off a bunch of stuff to get the whole light housing out to change the SIDE ... Read more

How To Remove Driveshaft From A 99 Jeep Grand Cherokee Limited

Asked on Aug 16, 2010 It has CV joints, not U-Joints, and its a 4x4. Its the front drive shaft I am trying to remove. I took the screws off the CV's, and it doesn't want to move at all. What can I do? ... Read more

Need To Replace CV Axle / Axle Shaft / CV Boot On ’01 Nissan Altima, How Much

Asked on Aug 18, 2010 I have a 2001 Nissan Altima, Manual Transmissiaon, 2.4 Liter engine, I went to a mechanic to have my oil changed, he said that I'm also going to need to replace my left front CV Axle or Axle shaft. He said that grease is leaking from ... Read more

Can Coil Springs On A Jeep Grand Cherokee Go Bad

Asked on Jul 21, 2010 I have a 1993 grand cherokee 5.2 awd.i replaced all 4 shocks.the jeep is still at the same height as it was before i replaced the shocks.the ride isnt so sloppy jeep has 171,000 on it.the front wheels are 2 1/2 inches away from the ... Read more

How Do You Adjust The Lenght After Removing The Nut From The Front Driveshaft

Asked on Aug 17, 2010 I have a 1997 Cherokee and i'm having trouble adjusting the length on the front drive shaft. I have it bolted on the front drive axle, and now i need to adjust the length so i can connected to the out put of the transfer case. I ... Read more