Question: How To Remove Cv Axle From Oldsmobile Ciera

How To Remove And Clean A Throttle Body On A 1996 Oldsmobile Ciera’s 3.1L V6

After 14 years of almost daily use in city traffic, I believe it's time to service the throttle body. A diagram, pictures, or whatever anyone has would be a great help. How do I get that screen off? ...

Where Is The Engine Cooling Fan Relay Located On The 1995 Oldsmobile Cutlass Ciera

The fan is not comming on when the engine gets hot ...

Remove Axle Nut On 2003 Camry

The axle is keyed and the axle nut has been dimpled into the keyway. Whats the best way to remove the nut, and also what should I do to add the dimple when I put on a new axle nut? ...

How Do You Remove The Drive Axles From A 93 Mazda So Trans Axle Can Be Removed

The manual says it can be disconnected from the trans axle without needing to remove it from the hub, but we don't see how. As well we tried to remove the axle nut, but even with a lot of force we have no luck, any suggestions? thanks ...

How To Remove Rear Axle Shaft ’72 Dodge W200, Dana 60

I'm trying to replace the rear brakes and before i can get to that i need to remove the axle shaft, full floating axle. I removed the 8 nuts but there are cone shaped lock washers. I've removed some of them and others are not moving i tapped a little with hammer and didn't budge. I also sprayed PB blaster. I ran out of ideas. this axle has the rear hub sticking out from the wheel about 3". So, the brake drum ...

Where Can I Get A Diesel Engine For My 1989 Oldsmobile Cutlass Ciera SL

I've been trying to crate a crate engine on mail order, but i cant seem to find one. is there any site on the enternet that i can get one? ...

How Do We Remove This Axle Nut

We are working on our 2004 Chrysler Sebring Sedan, and looks like we need to remove the axle nut to remove the rotor, and access a few other parts. Can anyone give us some input on the size of that nut? What is the size? Does it require anything special to get it off? Right or left hand threat? Etc... (I am asking for my dad by the way) Any suggestions would be greatly ...

Will My Rims Fit My Car

I have a 93 Oldsmobile Cutlass Ciera. I just got some 17"/9.5 rims. Their PCD is 5*120.65. The offset is +54. The center bore is 70.3. I took one of my original wheels off to see if they would fit (rim with no tire) and they seemed to fit. The offset seemed ok too. But i think my car's PCD is 5*115 so can I still put these rims on here with the minor difference of PCD?Please help me ...

How Do I Remove The Wheel Hub On A 2000 Accord

Need to remove the wheel hub. Everything is practically removed, including the axle nut. Do I need a special tool? Can I just hammer it out and hammer it back in when I'm done? Do I need to remove the axle rod out first? Thanks. ...

Remove Axle Nut On Dodge Durango

I am trying to fix the outer boot on the cv axle and i cannot get the axle nut off, any suggestions? ...