Question: How To Fix Broken Starter Hole On Chevy 400 Small Block

My1967 Chevy Camaro, 350 SB Is Broken Off Where One Of The 2 Starter Bolts Go, What Can I Do

My question is, how do I go about fixing the broken starter bolt hole on the block? The part of my engine block that is broke off is colsest to the firewall and isn't completely broke off. But I am afraid that I could possibly break that corner of the block off to where there won't even be a hole anymore!! Then what could you do? I don't want to have to pull the motor out either, ...

Small Block Chevy Starter Compatibility

As many of you know, there are a lot of parts that are interchangable on Small block chevy engines. Is there a web site showing the specifications of the starters? I use the parrallel bolted starter with the smaller flywheel. http://www.gmpartsdirect.com/performance_parts/store/catalog/Category.jhtmlCATID=4.html I am looking for one that draws the least amps, and can still turn my 350. Thanks ...

Does Anybody Know What The Hole In Block Behind The Distributor Is For On A 327 Chevy Engine

1960's 327 chevy small block engine. Hole on top of block behing the distributor. Not part of the intake manifold. ...

327 Big Block Is It True

I have a car in a bush and the guy it to me. I read it on the Wikipedia 1966 Rambler Rebel. He said the engine they used, they built in 1952 or 1954, i dont quite recall the year. But she said she used a BigBlock with a 327th Way to go Chevy small-block are 327meine question. Where can I get spare parts for a 327 big block AMC. A small black seal set? I need a new engine gasket ...

Advice On Rebuild Or Buy Rebuilt

I have an 84 Chevy Suburban 6.2 Diesel engine. I had a starter put on a while back and the shop that had it, I had to take it back a couple times, and it turned out they used a bolt that was too long and they never bothered to check how tight it held, so it shook and stripped out the holes in the block. After they completely messed it up again, and ate up yet another starter, I decided ...

Does J B WELD Work To Fix A Cracked Engine Block

I throw a rod in my mower. right thought the block!!!! its a 21 horse v twin Briggs & stratton. i've taken it a part ,and found the broken pieces of the piston rod. other than the hole in the case all else seems ok. just wondering if this stuff. will do the job patching the hole. any input will be helpful. thanks! ...

Url That Shows Detailed Diagrams And Descriptions Of What Each Part Is And What It Does In A Chevy Small Block

Website that has descriptions of the parts of a chevy small block engine. Details on how to disassemble and reassemble. Details what to look for that could be broken when you disassemble the engine. Website that has this, or a website that has a good knowlagable book for sale on it. ...

Broken Cylinder Head Stud In Block..need Help. How Do I Get It Out

I have a 98 plymouth breeze with a 2.4L engine and im changing the head gasket on it and when i was putting the head back on I broke a head bolt so i had to remove the cylinder head again and the broken part is about one inch inside the block.. the bolt didn't brake flat it broke in a 45 degree angle so it would be hard to drill a hole on it to use extractor. any ...

Is A Small Block Chevy 400 Strong Enough For Forced Induction

I have a 1979 chevy small block 400 cid motor and am going to twin turbo charge the truck. somebody mentioned to me that because of the displacement that the cylinder walls were to thin for high boost or high nitrous applications. the engine is standard bore. thanks for all answers and help. ...

Broken Alternator Bolt Stuck In Cylinder Head

So i asked this question the other day but now i have an even bigger problem. . .. . .i have a broken alternator bolt stuck in cylinder head with the easy out reversed drill bit broken inside of the bolt.. . sounds confusing for those who dont know what im talkin bout but when i went to the parts store the guy gave me 1 drill bit that was way to small so so when i drilled ...