Question: How Do U No If My Camshaft Sensor Is Working In My 1992 Ford F150

Location Of Camshaft Position Sensor On A 1998 Ford Taurus

My car started missing about two weeks ago. I had the plugs and wires changed but it still misfires between 45 and 60 mph. The "service engine soon" light came on yesterday and I took the car to Autozone and had the codes pulled. They told me that the camshaft position sensor was bad. My question : would a faulty camshaft position sensor cause the car to miss? and where can I locate the camshaft sensor to replace it? Thanks ...

Knock Sensor Ford F150

98 f150 4.2 V6 if knock sensor is not working how would it make the truck run . mine feels like low timing and spark knocks while driving. egr is working fine no change when unplugged i did not mention truck idles terrible has a miss on two cylinders goes away when above 2500 rpm but while at idle strong unburned gas smell at exhaust but spark knock is there when giving gas all the time i guess i ...

1992 Ford F150 38.5×1516 TSL Boggers

I have a 1992 Ford F-150 Super Cab It has a 6 "Rough Country Suspension Lift and a 3" Performance Accessories Body Lift. For tires I was on 38 runs to plan. 5x15-16 Super Swamper TSL Bogger. Does anybody know if I need spacers because of the width of the tire? ...

Location Of Camshaft Position Sensor On A 1994 Ford Windstar

I have a 1994 Ford Windstar 3.8L GL. I need to replace the camshaft position sensor, but I can't find it anywhere. I have tried searching online as well as using a repair manual. ...

Could It Be Bad Fuel, Camshaft Sensor, Or Knock Sensor

I drive a 2004 Nissan Murano , I was low on gas, stopped put $20 of gas in the tank, then drove ten minutes to the store. After about 15 minutes I restarted my car when driving off it tugged a bit. I drove another mile to another store , after 25 minutes tried to start the car, it took 3 times to finally turn on. The car now has a rough idle. I had my brother hook it up to ...

What Is The Function Of Camshaft Position Sensor And What Will Happened If Not Fixed

I purchased a used 1996 ford explorer and when I tried to get it inspected they told me I need to get the camshaft position sensor fixed in order for it to pass. What is this and if it is not fixed quickly what will happen to my car, also how much does a part cost and where can I get it fixed or find info on it in durham, NC? ...

I Have A 1992 Jeep Wrangler 2.5L Engine W/ 5 Speed Manual Trans.

I cannot find a crankshaft posistion sensor anywhere all the parts websites pull up is a vehicle speed sensor, does my jeep have a crankshaft sensor or a vehicle speed sensor? What is the diffirence and what does the vehicle speed sensor do? Does it have a camshaft posistions sensor being it is fuel injected? I cannot find one of these either, how would it not have one? Thanks for any help, i am very confused ...

Whats The Difference Bewteen Camshaft Sensor And Oxygen Sensor For Cars

I'd like to find out if there is any difference between Camshaft sensor and Oxygen Sensor of a car or are they noth the same thing. If they're not the same thing then what odes each one respectievely do. Thanks I'd like to find out if there is any difference between Camshaft sensor and Oxygen Sensor of a car or are they noth the same thing. If they're not the same thing then what does each one respectievely do. The engine management ...

1992 Audi 100CS Idling Rich And Speedometer Not Working, Could Both Be Caused By Vehicle Speed Sensor

Ok, it's a 1992 Audi 100CS, V6 5speed. The problem i'm having is that the speedometer isn't working and the car idles rich, you can smell the gas coming from the exhaust pipe. When i accelerate the car drives fine, the problem is only when the car is in idle. After driving on the freeway for a little while the car throws a code for the vehicle speed sensor, NOW, i was told that if i replaced the VSS that it ...

Cam Shaft/ Crank Shaft Sensor

Ok, I recently changed my spark plugs and wires. I have changed my alternator, battery, fuel filter and all that jazz. I have an OBD II computer that i check my dtc codes with and I have a code for camshaft position sensor a bank 1 and a crankshaft postion sensor A code coming up. Both have a CKT in the code and a performance in the code. My car stalls while i am driving and acts like it is ...