Question: Cost To Replace Timing Cover Impala

How Much Does It Cost To Replace The Timing Cover Or Timing Gasket In 1998 Malibu

I have had problems with this car since the beginning. The check engine light has be on since I bought it. I have brought it back to him several times and he just cleared the codes and said there is nothing wrong with it. Then my warranty ran out. I have replaced the intake manifold and head gaskets, the muffler, the rear bushings and the EGR valve. This code comes up all the time.or oil pressure switch code. The code will ...

Brought 96 Jeep Grand Cherokee To Mechanic For Coolant Leak, He Says It Is Timing Cover, Does It Sound Right

No visible leaks or residue on the water pump. No problem with hoses you can see when you open the hood connecting to reservoir and radiator. When I look underneath, there is white residue under the engine block on the RIGHT side. I hear a gurgling sound when I turn on the car. Sometimes it leaks and sometimes i doesn't. The mechanic says it is the timing cover, which will cost $600-700 parts and labor. He then says my ...

How Much Does It Cost To Replace A Timing Belt In A Kia Rio

I'm considering buying a 2003 Kia Rio as a commuter car for school. The asking price is $4500. It's a good car and the owner said he recently had the timing belt replaced. I've read that replacing timing belts seems to be a consistent problem with Kias. How much does something like that usually cost? I don't want to be pumping a ton of money into a car that I'm not paying a whole lot for in the first place. ...

Should I Replace My Timing Chain

I am doing a head gasket job on my pickup . (2000 GMC pickup with 350 Vortec ) Do you think I should replace my timing chain and/or Timing set ) while I have engine apart ? Not too long ago I had to replace the drive gear on the distributor .It sheared off. Since I replaced it has been running fine . Do you think it could've of jumped one tooth on the gear ? ...

Timing Belts

What is the regular schedule that you should replace a timing belt? and about how much does it usually cost? ...

Small Block Chevrolet 350 Timing Marks Do Not Line Up At #1 TDC

Valves on neighbor's recently rebuilt 350 were too tight, damaging cam, a few lifters and push rods, one head gasket was blown, and head cracked on one side. I replaced 1 head, cam, all lifters and push rods, timing set, and had heads done. Timing set was installed correctly. Distributor installed correctly at 5:30 and #1 physical TDC. Added a little advance and it runs great with no issues. Timing mark on cover is at apx. 12 o'clock and mark on ...

Quick Question On Ignition Timing

Ive been working on my '89 325i and i had to replace the rocker arms and timing belt. in that process i had to remove the distributor rotor and replace it with a new one. but as i was reading the manual it said something about ignition timing..? im worried now because im not sure if i set the timing correctly for the ignition and also what would happen if the ignition timing was off? ...

How Much Do Timing Belts Cost

I have a 98 Plymouth Neon with about 150,000 miles on it. How much should it cost to replace the timimg belt on it, both the part and labor? ...

Honda Civic Distributor And Timing Belt Replacement

My Honda Civic (96) cranks but engine won't start. I had it checked at 2 repair shops, both said I probably had to replace the distributor and timing belt and quoted $850 to fix it. I checked on ebay, I could buy both parts (used) for as low as $90.. and they seem small enough that I can replace them myself. Obviously, I've never done it before, but are these parts easy to replace? I also have a feeling that I ...

How Hard Is It To Replace The Rear Bumper Cover On A 1998 Toyota Camry

Hey guys. I just backed upto a pillar in front of my house...=[ So I have to replace the rear bumper cover of my 1998 Toyota Camry. Does anyone know how I can do this? I'm probably going to just order a new rear bumper cover online for about $120, but I'm not sure how hard it will be to replace it. Anyone know how difficult it will be? I've replaced my right front fender before, but this is totally different ...