Question: Code 3 Mx7000 Wiring

How Do I Hook Up A Mx7000 Code3 Light Bar

Im a vollunteer FF and i have the lightbar mentioned above is their any way to hook it up too a toggle switch if so how? Its going on a cavalier it has a bunch of cables in a thick wrap? ...

How Can I Find The Wiring Color Code For A Car Stereo Sony Cdx Gt510

How can I find the wiring color code for a car stereo sony cdx gt510? ...

I Have A 1997 GMC Jimmy It Has A Knock Sensor Code In The Computer.I Replace It But The Code Came Back.. Help

I just replaced the sensor and the code came up again. It also has a new computer in the car as well. If the computer must be re-flashed werdenDie person who worked on it tested the connection and the resistance of the sensor. Everything was ok. Also, the code cleared and we drove the car for 20 minutes connected to the scanner. No code I went home and it came back on ...

I Have A Kenwood Car Stereo

I entered the code but as i did not know what button to press after entering the code, i pressed different buttons lots of times and now the situation is that the screen shows "waiting 4" and after few hours it again asks for code and after entering the code i do not know what button to press. Can anyone help? ...

P0336 Engine Code What’s Causing It

I have a P0336 engine code. My vehicle is a 2004 Chevy Venture van (3.4L V6 FWD). I had this code diagnosed and it pointed to a bad crankshaft positon sensor. The van has two of these sensors. I had both replaced with aftermarket parts (non oem). After this service was done, I am still having this same code coming back. The symptoms are these: rough idling, what seems like intermittent misfire, when I put ...

Im Looking A Buy At 97 Gmc Sierra. Knock Sensor Code Shows On My Code Reader.Is That Something To Worry About.

The truck is in mint condition and seems to run fine. But the code reader is reading a code and it say "knock sensor 1 circut high input(bank 1 or single sensor). Is this something I should worry about before buying the vehicle,or is it and easy fix. ...

Help With Wiring Lights On My Jeep Tj Light Bar.

I have a jeep TJ and i just bought a stainless light bar that mounts on windshield hinges and goes over the winddhield FRAME with four lights for it, i still need to get a wiring kit for it. can anybody help me with wiring the lights through the bar and then somehow getting them inside the jeep. then how to wire it to my fuse box. i no it will look good but im clueless on anything that has to ...

Is It Possible To Wire A New Car Stereo WithOUT A New Wiring Harness

I have a 2002 Impreza with a stock stereo. I just bought and received a new Pioneer deck. I forgot to get a wiring harness. Is it possible to wire it without a new wiring harness? I know, I know...it would be easier with the wiring harness, but I want to bypass that if possible. Can I do it? ...

WHERE CAN I FIND A WIRING HARNESS

Question: WHERE CAN I FIND A WIRING HARNESS, I have a sony xr-ca300 automobile stereo and left the wiring harness in the truck i offered that it was set up in. I need to have yet another wiring harness. Does any individual know in which i can get 1? I have experimented with sony but are unable to appear to navigate the site or they just never offer it.Best answer for WHERE CAN I FIND A WIRING HARNESSAny vehicle stereo store ...

Toyota Sequia Skid Control Vsc Light

I'm working on a 2002 Toyota Sequoia traction control problem. The code that I pulled from the system points to the steering angle sensor code 1231. I'm using a snap-on solus for diagnostics. When I looked at the steering angle degree value it appeared to be stuck at -2 degrees no matter what position I put the steering wheel at. I checked the wiring circuits as described on mitchell and found them to be good. The ...