Asked on Jun 28, 2010
Put sealant on the gasket? Or do you even put sealant on a gasket? And about how much do you use? I just took off the thermostat housing and there was no thermostat in there. I guess that's why it always ran cold. So Im not ...
Asked on May 28, 2010
I need to change to the thermostat in a 1994 Ford Aspire. The bottom bolt holding the thermostat cover is impossible to reach with a socket or wrench. There is a metal coolant tube that is in front of the bottom bolt. I can't come from ...
Asked on May 25, 2010
Why does my car still overheat after replacing the thermostat and senser. My car has the 2.7L engine
there are no leaks and fans cycle normal. Replaced senser and thermostat. Engine is 2.7L. bleed air out of system. But still overheats.
Asked on Apr 16, 2010
The engine is overheating after about thirty minutes of driving.
The oil and anti-freeze levels are fine.
The top radiator hose gets hot, as does the radiator itself.
The heater works fine, blows hot air.
From advice I received, I am gambling on changing the thermostat, but would like to ...
Asked on Jun 3, 2010
Ok, so I have a 1997 Pontiac Sunfire. It was overheating so I took it to the store and ended up changing the thermostat. He has a week or two. Today was about 50 degrees F outside and began to overheat very quickly. No steam, just ...
Asked on May 30, 2010
I recently had someone look at my car because it was overheating and throwing out all the coolant they figured it could have been a problem with the waterpump or thermostat, so they removed the thermostat from my car and said that I could run my ...
Do you have any question about your car problem, or maybe you want to ask about specific parts of your car? Then this blog is for you, we have tried to collect as many as possible about automotive and accessories related topic.