Asked on May 19, 2010
We have a 350 V8 4 bolt main bored .060 over with a 14:1 compression ratio. And the number 5 cylinder gave up while we were breaking in the motor. It started mixing water with the oil and we are thinking of sleeving it but our ...
Read more
Asked on Jul 20, 2010
I have a 2002 yz 85 and I keep fouling spark plugs. I have to replace the spark plug almost every time i go riding. I've been mixing the gas on a 32/1 ratio. I was using mixing yamalube oil with the gas, but ...
Read more
Asked on May 22, 2010
1989 honda crx si, had the head machined/resurfaced because oil was mixing with water. i got it back and i put it back together now the distributor is REALLY hard to turn. the distributor has a key that fits into a slot in the cam, but ...
Read more
Asked on Aug 18, 2010
I replaced a head gasket yesterday on 1992 Toyota Corolla 1.6 4a-fe motor. When I loosened 2 maybe 3 or 4 (I dont remember exactly) camshaft bearing cap bolts, they squirted a very small amount of water up the bolt. I drained the radiator before I ...
Read more
Asked on Jun 17, 2010
Ive been finding water in my oil lately on the dipstick and now a couple days later I go to check the oil and the oil is clean now i ran the truck for several hours let it cool and then checked again and still no ...
Read more
Asked on Jun 2, 2010
There was oil getting in the water. Now there is a lot more oil getting in the water. When the engine is cold i take off the rad cap and oil comes out the cap as if there is pressure pushing the oil into the water. ...
Read more
Asked on Dec 31, 2011
I put water in my car and it immediately starts to let the water out I am able to drive it for about 30 mins before it starts to overheat again is it my water pump or maybe a hose ? any suggestion from you guys ...
Read more
