Question: 2002 Trailblazer 4x4 Front Axel Disassembly

Where Can I Find A Dana 44 Front Axel For My 1966 F250 Or Is It Easier To Get A Different Axel Altogether

I bought the truck with the front driveline and diff taken out completely. I can't seem to find the guts to the diff or a new driveshaft, and it seems like it would be cheaper/easier to just get a new axel. Are there others out there that might work? The 66 was the last year that had leaf springs. Any thoughts? ...

1995 Ford F150 FWD Front Spindle And Axle Assembly

Need a picture or illustrated parts breakdown for a 1995 Ford F150 FWD front spindle and axle assembly? I am not sure how much force to use in disassembly of the rusted spindle and if I knew for sure what disassembly was required for each part being removed as I try to get to the knuckle it will help me prevent damaging anything. Need a picture or illustrated parts breakdown for a 1995 Ford F150 FWD front spindle and axle assembly? ...

96 Ford Ranger 4×4 Is Not Working

4 wheel drive will not engage. Axels will not come out far enough to put on C clamp,as stated in Chiltons manual.Driver axel sticks out further than Passenger side axel,but neither axel comes out far enough to put on bearing spacer,needle thrust bearing,axel shaft spacer,and snap ring.How can I make this work??? ...

93′ F150 4×4 Straight Axel

I am putting a 6" susp lift on my 93' f-150 4x4. I was wondering what all components or adapters i need in order to put a straight axel conversion in with leaf springs instead of coils. I know that of course i need the axel and leafs. but what about steering, brakes, and all of the other necessities. their is a conversion you can buy for $2000 with everything that you need but i figured i could buy a ...

83 Chevy S10 Back Axel Is In The Top Of The Leaf Springs Can I Put The Axel Under The Leaf Spring To Gain Lif

I have a 83 s-10 4by4 pickup want to raise it 3 to 4 inches higher.I want to see if i can put the back axel under the leaf spring, it is now stock axel on "top" of leaf spring.Looks like it would go underneath with no problem.And then I can add like a 3inch steel block and longer "u" bolts.Trying not to spend 3 or 4 hundred on a lift kit. Any help will be useful...thanks ...

Snapped Rear Axel

The rear end of my 1988 Chevy Silverado 4X4 hit a ditch and the end of the right rear axel broke off taking the brake drum and all with it. Whats the best way to get the rest of the axel out?How do I tell what type it is to replace it and can you you get rear brake assemblys that holds the wheel cylinder and brake shoes as well as get the sleeve that holds the axel bearings and seal? ...

My 2002 Chevy Trailblazer Will Not Shift To 4wd.

If anyone knows of common prob. or quick checks other than the 4wd fuse i would appreciate some help. It will shift to LO range but no front axle engagement. It is a dash knob and not a shift lever. Can anyone help me get 4wd to work? ...

How Do I Remove The Sun Visor From My 2002 Trailblazer

there are no screws only a small hole. ...

Where Is The Oil Pressure Switch On A 2002 Chevy Trailblazer

Also do i need to disconnect the battery before changing it to prevent the check engine light from coming on? ...

Can You Get A Free Jeep Cj7 Lift By Changing The Leaf Springs

I have seen trucks put blocks between the axel and leaf springs for a small lift. i was wondering how hard is it to do this to a jeep. i know jeeps leaf springs go under the axel so can't i just flip the u bolts and and bolt the springs on top of the axel? how much of a lift will this give me and is it stable. and would it allow 35" tires. thanks. its for a 1979 cj-7 ...