Question: 2002 Nissan Altima Replace Wheel Stud

Regarding Car Tires/rims…

Looking to replace wheels from 1 car (chysler) to (ford). My 2002 ford taurus has the following: Bolt pattern = 5x4.25in - 5x108mm, Center Bore = 63.50, stud size = 1/2inx20. While the 2002 chrysler sebring conv. has: Bolt pattern = 5x4.00in - 5x100mm, Center Bore = 57.10, stud size = 12mmx1.5. Can I transfer the wheels? ...

2002 Nissan Altima 2.5 S 114,000 Highway Miles For 6800. Worth It

EXCELLENT CONDITION. BLACK WITH GRAY CLOTH INTERIOR. 5 SPEED, 4 CYLINDER. POWER WINDOWS, LOCKS AND SUNROOF. MILAGE IS 114,000 HIGHWAY MILES. RECENT WORK INCLUDES, NEW NISSAN ENGINE INSTALL 1 MONTH AGO WITH 12 MONTH NISSAN BACKED WARRANTY, NEW CATALITIC CONVERTER, OXYGEN SENSOR, 4 WHEEL BRAKE JOB, PADS AND ROTORS, NEW TIRES, ALIGHNMENT, AND HEAD LIGHT ASSEMBLIES PER NISSAN RECALL ...

How To Replace Ac Compressor Belt On 92 Nissan Altima

My 92 Nissan altima ac compressor belt is blown out and have to replace a new one. Tried to change it but its too tight to put it on. Do I have to loosten the nut on the compressor pulley?? Tried but it was too hard & had no luck. Is there any other way to do it. I would appreciate if any one can help me out in this. Thanks in advance. ...

Can I Put Exhaust Tips On A 2002 Nissan Altima 2.5s

I have a 2002 nissan altima 2.5s and i want to put chrome exhaust tips on it. It has 2 small exhaust pipes coming out the one side of it and the big problem is about half way down the pipes its bends a little bit down. So am i able to put chrome tips on it??? Thanks for the help!!! ...

Wheel Stud Replacement On Prelude

I have a 1997 Honda Prelude VTIR. The previous owner on rims that do not fit the car a good thing put 2 spacers placed on each front wheel. So now there is not much to keep thread on the stud to the nut on the wheel. And some of them are damaged, when I went for a wheel alignment. I want to fit longer studs so that I get to keep more threads on the nut on. I asked a ...

What Is The Difference Between The Driveshaft Of A Manual Transmition And Auto Transmition For A 2002 Altima

I'm trying to find out the diffrence between the drive axles for an auto and manual transmition for nissan altima 2002. ...

How To Replace A Broken Lug Stud On A 2002 PT Cruiser

When removing a tire yesterday, on my 2002 PT Cruiser, the lug nut was on so tight that it wouldn't loosen. Instead, the lug bolt actually broke at the end of the lug nut. How do you replace the broken lugt bolt? Can you do it yourself and if not is it very expensive to have repaired? Also, is it safe to drive with only four lug bolts/nuts holding the tire on? ...

What Is The Biggest Size Chrome Rims You Would Put On A 2002 Nissan Altima

What is the biggest size chrome rims you would put on a 2002 Nissan Altima? ...

PO325 Code I Replaced My Knock Sensor 3 Times

1997 Nissan Altima GXE, CEL is not on but I had it scanned after rough idling and cutting off on me and thats what came up. I replace first with a used one and then tried two new ones..still the same code and running bad! 1997 Nissan Altima GXE, CEL is not on but I had it scanned after rough idling and cutting off on me and thats what came up. I replace first with a used one and then tried two ...

Is It Safe To Use 1 Inch Wheel Spacers On My 1996 Nissan Altima

Since the car's body is narrow, i think it will make the car handle better. Is there any risks when using wheel spacers? ...