Asked on May 16, 2010
OK, ill try to explain this quick. My spark plug gap kept closing and i figured out the piston was hitting it closed. There is a sleeve in the cylinder head because someone stripped the plug hole threads, drilled them out, and put a ...
Read more
Asked on Aug 18, 2010
I am changing out my spark plugs on my 1999 ford mustang GT. This car uses the coil on spark plug set up meaning there is no distributor or wire sets. I took out the plugs and see oil all over the threads. I ...
Read more
Asked on Aug 5, 2010
My valve covers are not leaking down on to the plug, no oil runs and put paper towel their for a week and it's still clean. The oil seems to be getting pushed from the inside out through the spark plug threads, maby I need new ...
Read more
Asked on Jul 20, 2010
I have a 2002 yz 85 and I keep fouling spark plugs. I have to replace the spark plug almost every time i go riding. I've been mixing the gas on a 32/1 ratio. I was using mixing yamalube oil with the gas, but ...
Read more
Asked on May 18, 2010
My 2001 BMW 540i had a fouled spark plug (#3 driver's side) which was recently replaced (spark plug and ignition coil) after the car shook when idleing and driving at low speeds and smoked during ignition. What can I do to prevent this from happening again? ...
Read more
Asked on May 15, 2010
It's a '71 yamaha dt 250. It's a new spark plug and I replaced the stator and ignition coil with used parts. I even tried a couple different spark plug caps and got the same results.
river rat, ground it? run a wire from the plug wire ...
Read more
Asked on Aug 18, 2010
Changing spark plugs, I noticed that some ignition coils' dilectric grease / boot protector lube was discolored-- yellow & "pasty"-- appearing to no longer have luricating qualities. Is it OK to clean " Coil - on -Plug " ("C.O.P.") type spring - coils / boots, & ...
Read more
