Question: 1998 Chevy S10 Miss Fire P1404

Miss Fireing

I have a 1990 Dodge Omni and it only has 102 K on it and it's staring to miss fire BUT i have put new plugs and wires and spark sensor and Distributor Cap Rotor and new timeing belt all that stuff is only about 15 week old and it just stared to miss fire about 3 days ago and it's not missing fireing really bad tho but i had the Coil tested and it tested ok what would it be ...

Mr Men Car Air Fresheners

Im looking for the mr men and little miss bouncy air fresheners for a car i know there is mr happy, little miss chatterbox, little miss naughty and a mr bump. but is there any more? ...

Head Warped After 6 Months More Than 10,000 Miles Since We Attended Thermostat Replacement.

I have a Honda Accord 2002 V6, which showed an unusual temperature reading about 6 months ago (about 10,000 miles before). I say unusual because it went to the high end only when car was stopped for a long time (such as in a drive through with engine on). We had the thermostat changed immediately, but in July (4 months later) the temperature began to show similar symptoms and took it to radiator shop and they replaced the radiator. For another 2 ...

How Can I Fix A Chevy Vortec 4.3 With No Fire

I have a 1994 s10 blazer with a vortec 4.3. The problem that i have is that it isnt getting fire to the plugs. I have replaced the fallowing items. new distributor cab, rotor bug, sensor that goes inside the distributor, coil and plug wires and i even rebuilt the timing chain assbly. with new gaskets. It also has a new fuel pump with a new fuel filter. To me the engine is getting fuel but has no fire. Please can ...

3rd Part Of Overheating Malibu

He worked on for a few days with the heating, but now it is not. Also you have to make more anti-freeze every 1-2 days. Since I see no visible leak then I suspect that the problem is a blown head gasket or leak in the manifold, but I thought that would phase out many leaks from the engine, as opposed to a cylinder head gasket. But I also thought that if you blow a head gasket usually lose a lot ...

Bad Transmission Or Misaligned Linkage

I have a 1998 Chevy Malibu and all of a sudden I cannot push in the button on the gear shift to get out of park. It is hit or miss but lately, it has gotten worse. Seems like if I pushed the shifter forward that would do the trick, but even that is failing me. The owner’s manual said to put the ignition in the ACC position, Press the brake, shift to "N" and then start the ...

Model Fire Engines Please Help

Hello I've always been a fan of a state of vehic and I have lit videos of police and fire model engineswith in the light-bars and even seen sirens I wonder if a new where I could be a model fire truck with lights and get maybe one like siren on it now I do not mean, toy fire truck, I mean, a model fire truck ...

Need Help To Resolve A Miss In A 289 Ford Engine

I have rebuilt a 289 ford engine using a 302 block with 289 heads and internal parts. Engine cranks and runs fairly well at idle with small amount of miss. Under a load engine has a very bad miss and very little power. RPM's of engine will not come up. I have changed dist, plugs, wires, coil, intake, carb and checked valve settings. Nothing seems to help. I would be very thankful for any help with this problem. I have also ...

Chevy 350 Turns Over, But Doesnt Start

My chevy C10 that I bought didnt run when I purchased it. IT was sitting for a while. The carburetor needles were loose and carb caught fire. Holley 4160 carb was rebuilt. I replaced the battery, spark plug wires, distributor cap, and the carb obviously was rebuilt. The truck turns over but that it. It doesnt back fire or anything? Could the distributor be put on wrong? Help? ...

Advice Needed For 1998 Chevy Silverado Exhaust

I have a 1998 Chevy Silverado in there with the 350 V8. It has been a true duel exhaust on it, although you do not really loud, was at all because, you stand behind the strikers. I wonder if it would rather buy an advantage for two new mufflers from Flowmaster or Magnaflow and if so, which. Or if it make a big difference if I had taken only several tips to the existing lines. ...