Question: 1963 C10 Bad Resistor Symptoms For 350

Is A Ballast Resistor Supposed To Get Too Hot To Touch After Running The Engine Ten Minutes

I re-used a ballast resistor from an older Mallory coil when I replaced it and the old Mallory dual-point distributor with a new Mallory dual point distributor but switched coils to a new MSD Blaster 2 that is supposed to have an .8-ohm resistor. Is there some way other than buying an ohm-meter (which is is short supply here as are parts stores that sell resistors) to tell if the resistance is too great? The engine runs perfect but I ...

I Have A 2002 Ford Taurus. A/C Is Not Working. I Replaced The Motor Blower Resistor And Checked Fuse.

Question: I Have A 2002 Ford Taurus. A/C Is Not Working. I Replaced The Motor Blower Resistor And Checked Fuse., Any concepts on what I can verify following prior to I go to a mechanic?Best answer for I Have A 2002 Ford Taurus. A/C Is Not Working. I Replaced The Motor Blower Resistor And Checked Fuse.Does the blower operate? When you flip on the Air conditioning unit, can you see the compressor engaging? You can purchase a recharge kit at any ...

Is Anybody Interested In Buying 1963 Studebaker Lark Partslike The Alternator,doors,chrome Bumpers,etc

Is anybody interested in buying 1963 studebaker lark parts like the alternator,doors,chrome bumpers,vavle covers,radiator,grille,radiator fan,carburator,and the hood and other misc parts?call 1-315-250-4491 if interested ...

Dodge Ram A/C Not Blowing At All.

Ok I have a 2004 Dodge Ram 1500 QCSB 4x4 with the 4.7. My ac was working fine and then no matter what speed it was on it would just stop blowing. Then in a few minutes it would work again. Then stop again and now it won;t blow at all. My compressor clicks on and runs fine. I pulled the blower motor and tested it and it works fine. I changed the blower motor resistor and it still won;t work. ...

I Have A 1963 Triumph Spitfire And It Has Points And Condenser, But I Want To Swap It With…

I have a 1963 Triumph Spitfire and it has points and condenser. Is there an electronic ignition control module/unit that I can use instead of using the standard points and condenser? Or can I use a different distributor from a later model Triumph so I can use the ignition control module/unit? Thank you for any help. ...

1963 Impala Wont Start After Spark Plugs, Distrpitor Wires Replaced

I just got done tuning up my 1963 impala and the car wants to start but it doesnt want to just got a battery replaced new spark plugs and new disptor wires replaced it turns but it wont start new battery and new coil new despotor wires and new spark plugs ...

Symptoms Of Bad Oil Pressure Switch

Can anyone tell me what the symptoms of a bad oil pressure switch (sending unit)? I believe my car may have a bad one, but I want to be sure before I replace something that doesn't need replaced. Thanks in advance. ...

What Is Your Favorite Engines

I have several: Best Chevy engine - 409, particularly the Z-11 drag racing engine Best Ford engine - Boss 429 Hemi (followed closely by SOHC 427) Best Mopar engine - Current 528 Hemi crate engine Best classic car engine - Duesenberg DOHC, 4 valve-per-cylinger straight-8 Best Concept-car engine - recent Cadillac Sixteen (1000 hp) Best Diesel - WWII Junkers opposed-piston two-stroke aircraft diesel Okay, a couple of additions: Best small-car engine: Suzuki 993 cc three-cylinder used in the Chevy Sprint, or the Geo Metro version Best motorcycle engine: Honda CBX ...

What Are The Symptoms Of Bad Or Old Spark Plugs In A ’03 Jeep Wrangler

I think that my spark plugs are worn out. My Jeep feels like if it loses power in first gear and has unstable idle. What would the spark plugs look like if they are old and I took them out, and what are the symptoms of having old ones? ...

Where Can I Find Parts For A 1963 Jeep J300 PU In Corvallis Oregon

Leaf springs w/3 to 6 in lift, Axes (dana 60 frontend or dana 44) ...