Question: 03 Silverado Camshaft Sensor Location

Location Of Camshaft Position Sensor On A 1997 Mercury Villager

I hooked up an OBD II and it gave me the code P0340 Camshaft Position Sensor A-Bank 1 Circuit Malfunction. What does that mean and can it stop the spark from reaching the coil? I also need the location for this particular sensor? HELP!!! THANKS!!! ...

Location Of Camshaft Position Sensor On A 1998 Ford Taurus

My car started missing about two weeks ago. I had the plugs and wires changed but it still misfires between 45 and 60 mph. The "service engine soon" light came on yesterday and I took the car to Autozone and had the codes pulled. They told me that the camshaft position sensor was bad. My question : would a faulty camshaft position sensor cause the car to miss? and where can I locate the camshaft sensor to replace it? Thanks ...

Where Is Crankshaft Posistioning Sensor Location For ’01 Silverado 8.1L V8

I think it's on timing chain cover below cam above crank pulley. Pulled out and was bout 3/4 inch long magnet. Parts store told me this was "camshaft posistioning sensor" but felt inside hole and cranked motor over and felt the crank turn. Cant believe a camshaft sensor works off crankshaft. Looked for it behind motor to no avail. Please advise. Thanks in advance. ...

Can Someone Please Describe The Location Of The Crankshaft Position Sensor On A 2003 Nissan Altima

I purchased the sensor after the OBD II equipment stated that there was a problem with it, and replaced a sensor that is exactly the same on the drivers side. I have a feeling that I got the camshaft sensor and not the one with the problem, therefore I need to know where the crankshaft sensor is so I can replace the right one. Dealership confirmed that the part number for both is the same but could not give ...

Camshaft Sensor Location In ’88 Pontiac Bonneville.

I have a code 41 service engine light code, which I recently diagnosed as a faulty camshaft sensor. The part is only $ 20 and everywhere I see them say it's an easy fix. I can not seem to find where the sensor. If someone could tell me how you get it and what I need to remove inorder to get it, it would be very helpful. BTW: This is where it is Autozone said was: "under the hood, passenger side, ...

Location Of Camshaft Position Sensor Located On A 2001 Isuzu Rodeo

I have a 2001 isuzu rodeo, manual transmission, 4 cyl, 2.2, the check engine light comes on and off, i took it to a discount auto part, they did a test with a scanner, and it came out that the camshaft position sensor needed to be changed, I do have the piece, but i dont know where it goes, need help... ...

Location Of Camshaft Position Sensor On A 1994 Ford Windstar

I have a 1994 Ford Windstar 3.8L GL. I need to replace the camshaft position sensor, but I can't find it anywhere. I have tried searching online as well as using a repair manual. ...

Whats The Difference Bewteen Camshaft Sensor And Oxygen Sensor For Cars

I'd like to find out if there is any difference between Camshaft sensor and Oxygen Sensor of a car or are they noth the same thing. If they're not the same thing then what odes each one respectievely do. Thanks I'd like to find out if there is any difference between Camshaft sensor and Oxygen Sensor of a car or are they noth the same thing. If they're not the same thing then what does each one respectievely do. The engine management ...

Cam Shaft/ Crank Shaft Sensor

Ok, I recently changed my spark plugs and wires. I have changed my alternator, battery, fuel filter and all that jazz. I have an OBD II computer that i check my dtc codes with and I have a code for camshaft position sensor a bank 1 and a crankshaft postion sensor A code coming up. Both have a CKT in the code and a performance in the code. My car stalls while i am driving and acts like it is ...

Acura Tl Camshaft Vs. Crankshaft Sensor

I have a 97tl 3.2. its had been not strating form time to time, but nothing showed up on the starter or alternator tests. i was told it was the camshaft position sensors by one mechanic, and then 2 other mechanics said i dont have thoe parts on the car, and it must be the crankshaft sensor. i couldnt locate camshaft sensors on on the diagram either.just trying to get some guidance and avoid getting ripped off. ...