How To Install A Car Stereo Without A Wiring Harness Adapter
Posted in Car Electronics | Asked on Nov 21, 2011
I have a 1989 jeep comanche and someone gaveme an Alpine stereo. Nobody makes a wiring harness adapter for that vehicle…..how can i install it???
There are 4 Answers for "How To Install A Car Stereo Without A Wiring Harness Adapter"
Http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200425186112&rvr_id=&crlp=1_263602_263622&UA=WXI7&GUID=cee0b8231260a0b58701b431ffc0325d&itemid=200425186112&ff4=263602_263622
Metra Wire Harness part number 70-1002 is the wiring harness for your truck.
Go to a best buy, they will either have one or will order one for you.
please do not hard wire the deck into your car. while it is possible, It just makes for more nightmares then its worth
1988-89 Jeep Commanche Stereo Wiring
Constant 12V+ Red/White
Switched 12V+ Purple/White
Ground Black
Illumination Blue/Red
Dimmer Red/Black
Antenna Trigger Gray
Antenna Right Front
Front Speakers 5 1/4″ Doors
Left Front (+) Gray
Left Front (-) Yellow
Right Front (+) White/Red
Right Front (-) Brown/Red
Rear Speakers 4″ x 6″ Side Panels
Left Rear (+) Gray/White
Left Rear (-) Brown/White
Right Rear (+) White/Black
Right Rear (-) Brown
You can use this to matchup the wires to the Alpine