How To Deactivate Security System On A 98 Saab 9000
Posted in Car Electronics | Asked on Apr 20, 2011
Basically the alarm is activated and my car thinks its being stolen. If you try and start it the alarm oes off, it’s disabled the ignition & the fuel pump & pretty much everything. To deactivate it you’re supposed to use the button on the key but mine doesn’t work anymore, are there any other ways to fix it? Please help!
There are 3 Answers for "How To Deactivate Security System On A 98 Saab 9000"
Take a wrench and bam! bam! bam! wack it against your car’s hood and it will stop….
Put your key in the drivers door.
Turn the key to the lock position twice, as in two individual times.
Turn the key back to the unlock position once to unlock drivers door, then again to unlock all the doors.
Get in and try to start the vehicle. The above procedure should de-activate the security without the remote.
If the above does not work, you should disconnect the negative battery terminal with all doors unlocked for five minutes, then reconnect the battery terminal and try to start.
The factory Saab 9000 Alarm system does not (can not) disable the car.
You may have an active alarm and an additional problem.
You may have an aftermarket alarm system disabling the car.
If it is aftermarket, like an avitol, Viper, or Clifford. you will want to consult an aftermarket installer to remove or disable the alarm.
Most aftermarket alarms just cut the switch wires to disable starting.