Car Stereo Wiring
Posted in Car Electronics | Asked on Mar 14, 2011
I am installing a kenwood stereo (model KDC-6015) into my 1991 chevy s-10. I need to know what all the wires are for. Which colors do what? And then which ones do I connect them to inside the truck? I just took out the stock stereo, so it has all the original wiring.
There are 5 Answers for "Car Stereo Wiring"
Go here http://www.metraonline.com for the harness adapter and trim kit you’ll need.
Once you find the right part number, you should be able to find it at Best Buy.
If you already cut off the harness, you can also find it at the site as well.
check out http://www.installdr.com
you need to match up the colors of the wires. the front speakers, rear speakers, antenna, battery, etc…. most if the wires are not needed
just finished a complete install in my s10
go 2 your local stereo shop not best buy and tell him your specs
year make model and he should give you a harness and match color 2 colr watch out 4 the black stripes on your wires those are your grounds
buy a harness for you viechiel they only cost under 20 bucks go to wallmart or meijers dont cut the wires or your gonna have a mess