Subscribe to Car Repair Questions Answered - Tips and Manuals on Common Car ProblemsNews FeedSubscribe to Car Repair Questions Answered – Tips and Manuals on Common Car ProblemsComments

Browse // Home // Ignition Systems // What Is The Easiest Way To Change/get To The Distributor Cap On Dodge Ram 2500

What Is The Easiest Way To Change/get To The Distributor Cap On Dodge Ram 2500

Asked on: June 3, 2010
Under: Ignition Systems
Topics:
1 Answer

I’m going to tune my truck is a secret to getting Acsess distributor dam.

   

What expert says

There are One Response to “What Is The Easiest Way To Change/get To The Distributor Cap On Dodge Ram 2500”
  1. eferrell01 says:

    There is no easy way. Remove the air intake tube from the throttle body. Get a pillow to lay on top of the engine. Saw about 1½ inches off the end of he handle of a Phillips screw driver, reach over the back and feel for the 2 screws holding on the cap. Unscrew them and raise the cap up high enough to see what all the wires are hung under and move all that stuff out of the way. If you get a new cap and wires, wire the cap before you put it back,because you cannot see where the wires go with the cap installed. It is all done by feel, unless your head is skinny enough to stick under the dash and look straight down.
    One good thing about it: It will be easier the second time.

eXTReMe Tracker