I Need To Know The Location Of The #1 Cylinder On The Distributor Cap Of A 83 Dodge 318

Posted in Ignition Systems
  • I need to know the location of the #1 cylinder on the distributor cap of a 83 dodge 318?

    There are 4 Answers for "I Need To Know The Location Of The #1 Cylinder On The Distributor Cap Of A 83 Dodge 318"

    1. Bubba says:

      The easy way to tell you on older models is to locate the no.1 on the intake pull the plug out bring no.1 up on top dead center,and thier the rotor will point to it this is the best way due to age of timing chains and cam wear.

    2. dodge man says:

      here’s you a diagram of it,its the same on your engine as it is on this one,good luck, http://autorepair.about.com/library/firing_orders/bl-fo-6511.htm ^(http://www.carparts21.com/goto/http://autorepair.about.com/library/firing_orders/bl-fo-6511.htm)

    3. Marious2k says:

      driverside front of engine the first plug wire. follow it back to the cap.#1.

    4. eferrell01 says:

      The easy way to tell is look at the cap. #1 is marked on the cap between the wire tower and coil tower. Most generally will be straight toward the front of the engine.

    eXTReMe Tracker